National Item Identification Number
00-990-4009
009904009
5365-00-990-4009
5365009904009
National Stock Number
Item Name
SHIM
Federal Supply Class
5365
Description
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
Commercial and Government Entity Code (Supplier Data)
05606
GENERAL DYNAMICS ARMAMENT AND
TECHNICAL PRODUCTS INC.
128 LAKESIDE AVE
BURLINGTON
VT
05401
802-657-6109
19200
Reference Numbers (Part Numbers)
MIL-S-22499
135B5372-7
135B5372-7
Required Categories
MATERIAL
CONSTRUCTION
LAMINATION THICKNESS
OUTSIDE DIAMETER
APERTURE DIAMETE
Required Description
STEEL CORROSION RESISTING
LAMINATED
0.002 INCHES NOMINAL
1.140 INCHES MINIMUM