National Item Identification Number
01-016-8999
010168999
5365-01-016-8999
5365010168999
National Stock Number
Item Name
SPACER,PLATE
Federal Supply Class
5365
Description
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
Commercial and Government Entity Code (Supplier Data)
59501
96429
WESTPORT INTERNATIONAL INC.
5345 STATE HIGHWAY 12
P.O. BOX 310
NORWICH
NY
13815
904-739-4296
Reference Numbers (Part Numbers)
SB565
SB565
Required Categories
STYLE DESIGNATOR
HOLE DIAMETER
BOLT CIRCLE DIAMETER
OUTSIDE DIAMETER
SPECIAL
Required Description
A12 CIRCULAR
0.188 INCHES MINIMUM AND
0.218 INCHES MAXIMUM
1.820 INCHES NOMIN