National Item Identification Number
01-358-6689
013586689
5365-01-358-6689
5365013586689
National Stock Number
Item Name
SPACER,PLATE
Federal Supply Class
5365
Description
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
Commercial and Government Entity Code (Supplier Data)
02769
LOCKHEED MARTIN CORPORATION
DBA LOCKHEED MARTIN DIV MARITIME
199 BORTON LANDING RD
MOORESTOWN
NJ
08057
856-722-4615
56232
Reference Numbers (Part Numbers)
1055833-1
1055833-1
3154499-1
Required Categories
BOLT HOLE QUANTITY
APERTURE WIDTH
APERTURE LENGTH
HOLE DIAMETER
OVERALL LENG
Required Description
4
0.494 INCHES MINIMUM AND
0.500 INCHES MAXIMUM
1.119 INCHES MINIMUM AND
1.1