National Item Identification Number
01-377-2682
013772682
5365-01-377-2682
5365013772682
National Stock Number
Item Name
SPACER,PLATE
Federal Supply Class
5365
Description
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
Commercial and Government Entity Code (Supplier Data)
32559
BIVAR INC
4 THOMAS
IRVINE
CA
92618
949-951-8808
04901
BOONTON ELECTRONICS CORPORATION
DBA BOONS ELECTRONICS
25 EASTMANS RD
PARSIPPANY
NJ
07054
973-386-9696
Reference Numbers (Part Numbers)
T-101-200
74241003A
Required Categories
MATERIAL
OVERALL THICKNESS
BOLT HOLE QUANTITY
STYLE DESIGNATOR
HOLE DIAMETER
Required Description
PLASTIC POLYAMIDE
0.195 INCHES MINIMUM AND
0.205 INCHES MAXIMUM
4
A15E NON-C
