National Item Identification Number
12-170-2718
121702718
5365-12-170-2718
5365121702718
National Stock Number
Item Name
SHIM
Federal Supply Class
5365
Description
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
Commercial and Government Entity Code (Supplier Data)
D8056
SCHOTTEL-WERFT
JOSEF BECKER GMBH & CO.KG
MAINZER STRASSE 99
SPAY
56322
GERMANY
02628-61343
D9913
GENERAL DYNAMICS
SANTA BARBARA SISTEMAS GMBH
BARBAROSSASTR. 30
KAISERSLAUTERN
67655
GERMANY
0631-3616-0
D1839
BUNDESAMT FUER WEHRTECHNIK
UND BESCHAFFUNG
7360
KOBLENZ
GERMANY
0261-400-0
D9298
GLEASON-HURTH
MASCHINEN UND WERKZEUGE GMBH
400826
MUENCHEN
GERMANY
089-35401-0
Reference Numbers (Part Numbers)
1002824
163528105
2500048-202110-25
891.05.012.01.4
Required Categories
Required Description