National Item Identification Number

00-474-3565
004743565
5365-00-474-3565
5365004743565

National Stock Number

Item Name

SPACER,PLATE

Federal Supply Class

5365

Description

A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.

Commercial and Government Entity Code (Supplier Data)

---

Reference Numbers (Part Numbers)

6018
6018

Required Categories

MATERIAL
STYLE DESIGNATOR
OVERALL LENGTH
OVERALL WIDTH
APERTURE DIAMETER

Required Description

ALUMINUM
A15A NON-CIRCULAR W/BOLT HOLES
0.875 INCHES NOMINAL
0.875 INCHES NOM