National Item Identification Number
National Stock Number
Federal Supply Class
Referenced on: http://gasturbinegenerators.tpub.com//TM-1-2840-254-23P/css/TM-1-2840-254-23P_206.htm
Referenced on: http://gasturbinegenerators.tpub.com//TM-1-2840-254-23P/css/TM-1-2840-254-23P_375.htm
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
Commercial and Government Entity Code (Supplier Data)
PUROLATOR FACET INC.
8439 TRIAD DR
Image (It is your responsibility to verify the accuracy of these images)
Part Numbers (Reference Numbers)
THE MANUFACTURERS DATA
0.845 INCHES MINIMUM AND
0.865 INCHES MAXIMUM
0.740 INCHES MINIMUM