National Item Identification Number

00-997-0558
009970558
5365-00-997-0558
5365009970558

National Stock Number

Item Name

SPACER,PLATE

Federal Supply Class

5365

Description

A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.

Commercial and Government Entity Code (Supplier Data)

---

D3026

---

KODAK GMBH
-BEREICH HEALTH IMAGING-
HEDELFINGER STR. 60
STUTTGART
70327
GERMANY
497114065796

---

19139

---

EASTMAN KODAK CO
DBA KODAK
343 STATE ST
ROCHESTER
NY
14650
800-828-6203

---

Reference Numbers (Part Numbers)

453482
453482

Required Categories

MATERIAL DOCUMENT AND CLASSIFICATION
BOLT HOLE QUANTITY
HOLE DIAMETER
OVERALL

Required Description

KRALASTIC HTHT FSC 19139 MFR REF SINGLE MATERIAL RESPONSE
2
0.169 INCHES MINIM