National Item Identification Number
01-191-0763
011910763
5365-01-191-0763
5365011910763
National Stock Number
Item Name
SHIM
Federal Supply Class
5365
Description
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
Commercial and Government Entity Code (Supplier Data)
97403
CECOM LR CENTER
OPNS CENTER SITCO USASA MDW
10115 GRIDLEY RD SUITE 228
FORT BELVOIR
VA
22060
Reference Numbers (Part Numbers)
13212E3590-1
Required Categories
CONSTRUCTION
BOLT HOLE QUANTITY
HOLE DIAMETER
OVERALL LENGTH
OVERALL WIDTH;
Required Description
ONE-PIECE
2
0.467 INCHES MINIMUM AND
0.476 INCHES MAXIMUM
4.875 INCHES NOMIN