National Item Identification Number

01-334-0564
013340564
5365-01-334-0564
5365013340564

National Stock Number

Item Name

SPACER,PLATE

Federal Supply Class

5365

Description

A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.

Commercial and Government Entity Code (Supplier Data)

---

0CDN3

---

DRS ENGINGEERING DEVELOPMENT
LABORATORIES INC.
4391 DAYTON XENIA RD
DAYTON
OH
45432
937-320-7300

---

Reference Numbers (Part Numbers)

2012-0128-06-1

Required Categories

STYLE DESIGNATOR
OVERALL LENGTH
OVERALL WIDTH
SPECIAL FEATURES

Required Description

A24 RECTANGULAR
1.310 INCHES MINIMUM AND
1.312 INCHES MAXIMUM
0.334 INCHES MI