National Item Identification Number
01-373-0283
013730283
5365-01-373-0283
5365013730283
National Stock Number
Item Name
SPACER,PLATE
Federal Supply Class
5365
Description
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
Commercial and Government Entity Code (Supplier Data)
K0648
SMITHS AEROSPACE MECHANICAL SYSTEMS
WOLVERHAMPTON
WOBASTON ROAD
WOLVERHAMPTON
WV9 5EW
UNITED KINGDOM
01902 397700
K0648
SMITHS AEROSPACE MECHANICAL SYSTEMS
WOLVERHAMPTON
WOBASTON ROAD
WOLVERHAMPTON
WV9 5EW
UNITED KINGDOM
01902 397700
Reference Numbers (Part Numbers)
H001A0033-00
H002A0100-00-6
H002A0100-00-6
Required Categories
MATERIAL
OVERALL THICKNESS
STYLE DESIGNATOR
OVERALL LENGTH
OVERALL WIDTH
AP
Required Description
COPPER ALLOY
0.140 INCHES MINIMUM AND
0.150 INCHES MAXIMUM
A15M NON-CIRCULAR
