National Item Identification Number
01-417-0010
014170010
5365-01-417-0010
5365014170010
National Stock Number
Item Name
SPACER,PLATE
Federal Supply Class
5365
Description
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use DISK, SOLID, PLAIN. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see SPACER, SLEEVE. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see SHIM. For items with one hole centrally located conforming to the above dimensional criteria use WASHER, FLAT or SPACER, RING as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes GASKET; INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC COMPONENT.
Commercial and Government Entity Code (Supplier Data)
32904
IN-SPECK CORPORATION
208 EAST PENN ST.
NORRISTOWN
PA
19401
610-272-9500
53711
32904
IN-SPECK CORPORATION
208 EAST PENN ST.
NORRISTOWN
PA
19401
610-272-9500
53711
Reference Numbers (Part Numbers)
845-6603141-83
845-6603141-83
845-6603154
845-6603154
Required Categories
MATERIAL
OVERALL THICKNESS
STYLE DESIGNATOR
OUTSIDE DIAMETER
APERTURE DIAMET
Required Description
STEEL COMP 4140
0.293 INCHES NOMINAL
A1 CIRCULAR
1.980 INCHES MINIMUM AND
2.
