National Item Identification Number
01-482-1934
014821934
5365-01-482-1934
5365014821934
National Stock Number
Item Name
SHIM
Federal Supply Class
5365
Description
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use DISK, SOLID, PLAIN. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. For items with thickness greater than those indicated above, see SPACER, PLATE; WASHER, FLAT and SPACER, RING. When thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and BEARING, WASHER, THRUST.
Commercial and Government Entity Code (Supplier Data)
07270
FLO-TORK INC.
DBA MOOG FLO-TORK
1701 N MAIN ST
ORRVILLE
OH
44667
330-682-0010
07270
FLO-TORK INC.
DBA MOOG FLO-TORK
1701 N MAIN ST
ORRVILLE
OH
44667
330-682-0010
Reference Numbers (Part Numbers)
1150-41475 ITEM 11
41486-1
Required Categories
MATERIAL
MATERIAL DOCUMENT AND CLASSIFICATION
OVERALL THICKNESS
III END ITEM
Required Description
COPPER ALLOY
QQ-B-613 FED SPEC 1ST MATERIAL RESPONSE
0.010 INCHES NOMINAL
ROT
